Performance

The Mustang 2550RT Track Loader was designed from the ground up...

2550RT

Height to Hinge Pin - Fully Raised (mm) 128" (3251)


  • Tier IV-certified Deutz diesel engines provide 74.3 hp (55.4 kW)
  • Rated operating capacity at 35% of 2550 lbs (1157 kg), which can safely pick-up and operate to it's full potential.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • 243 ft-lbs (330 Nm) of useful torque to assist the engine power output.
  • Optional counterweight/bumper can gain extra tipping capacity while offering increased rear protection.
  • Class-leading lift breakout force and high tilt breakout force give you the power needed to break out concrete slabs, frozen piles of dirt or remove tree stumps.

Operator's Cab

The extra-large, state-of-the art operator’s station on the 2550RT Track Loader is designed for optimal operator comfort resulting in more productivity.

2550RT Cab

  • The hydraulic-pilot controls are mounted to the seat, so they move with the operator that gives a true 1:1 proportional control over the drive system.
  • All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
  • Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Pilot Hydraulic transmission with direct engine coupling delivers operating efficiency while our actuation valve technology keeps the power flowing. This feature monitors and adjusts the hydrostatic drive pump to produce the ideal tractive effort.
  • Easy to use, multi-function display incorporates all warning & operation lights and machine configuration screens. Single button allows for simple scrolling and selection of various display functions
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Controls

Controls on the 2550RT Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

2550RT Cabin

  • The IdealAccess™ Door is a patented design featuring a low clearance door that delivers cab-to-canopy versatility and easy access.
  • Level II ROPS/FOPS provides the highest level of safety protection for an operator in a roll over or falling object situation.
  • Our all new seat-mounted pilot control system has redesigned the cab by mounting the controls to the seat. This provides added leg room and less arm fatigue during operation.
  • Tilt out foot feature allows for best-in-class foot well clean out and provides easy access to the fuel tank and other components under the cab.
  • Excellent sight lines from all sides for safe and precise placement of loads and reduced jobsite incidents. A high-mounted seat provides an excellent vantage point to the attachment and cutting-edge.
  • New "glove friendly", weather proof push style buttons with an automotive design and feel

Engine

The 2550RT engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

2550RT Engine

Gross Power (kW) @ rpm 74.3 hp (55.4) @ 2300


  • Utilizing automatic regeneration and no fuel additives the Tier IV Deutz Turbo Diesel Engine is simpler to maintain and a better overall value.
  • Dedicated, welded chassis w/ Flex steel coupler is custom built to aid in superior weight distribution, which enhances stability, grading, tractive effort, and ride control.
  • Engine visually alerts operators to any issues with the Engine ECU, Coolant, Oil Pressure, Engine Air Filter
  • Radiator & Hydraulic Oil Cooler will extend the life of the oil, thereby extending the life of the engine since towing and high stress can be damaging. ASK TYLER HANDLE
  • Increased fuel capacity leads to less downtime on the jobsite and quicker turnaround on projects.
  • To ensure more protection, we have included vandalism lock provisions on the battery, engine cover, fuel cap, hydraulic tank, rear door and toolbox

Hydraulics

The 2550RT Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

2150RT Hydraulics

Auxiliary Hydraulic Flow - Rated Speed (L/min) @2300 29.07 gpm (110)
High-Flow Hydraulic Flow - Rated Speed (L/min) 37.7 gpm (142.7)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction


  • IdealTrax™ Industry Exclusive Automatic Track Tensioning system eliminates weekly tension checks and costly track replacements. Tracks are automatically tensioned when the engine is started and during operation. Tension is release when the engine is shut off.
  • Power track drive motors deliver superior pushing power against the competition.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Hyrdaglide™ Ride Control system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Standard selectable self-leveling hydraulic lift keeps the bucket level throughout the raise/lift cycle and can be turned on and off by a switch in the cab.
  • Offering 37.7 gpm (142.7 L/pm) of standard high aux high flow to power a wide variety of High Flow EDGE attachments

Lift Arm

The robust lift-arm on the 2550RT Track Loader is designed for optimal strength, visibility and capacity.

2550RT Boom Up

Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 34.5" (876)


  • Radical Lift design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height.
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

Serviceability

Serviceability is very important to our customers. The 2550RT is sure to exceed your service expectations.

2150RT Service

  • IdealTrax™ Industry Exclusive Automatic Track Tensioning system eliminates the need for manually tensioning the tracks on the loader before operation, saving valuable time on the jobsite.
  • Central Sealed Fuse Location Easily Accessible in rear of machine
  • Remote mounted engine oil filter, fuel filter and water separator all mounted on the left side of the machine for easy access for service. Belly-pan clean out is now 2X the size of previous models, resulting in slightly lower ground clearance.
  • Electrical harnesses all marked with indicators for mounting in place by indicated positions, for more reliability
  • Digital display provides quick responses to possible errors and codes on the machine.
  • Easy Manager System is a simple and flexible tool that optimizes operational monitoring of your equipment whatever the number and your business!

Attachments

Angle Broom

Angle Broom

The EDGE angle broom cleans up just about anything, anywhere. This compact loader attachment can be used year-round and is an excellent tool to assist in the removal of snow or debris on sidewalks, parking lots and more.
View Details

auger adapter diagram

Auger Bites - Adapters

EDGE auger bit adapters are available for adapting your round auger drive to a hex bit and and vice versa. Auger extensions are also available.
View Details

Auto Rake

Auto Rake

From turf and seeding projects to heavy duty landscaping, there is an EDGE rake attachment available to turn your compact loader into a valuable landscaping machine. The EDGE auto rake is the ideal attachment for grooming and finishing soil for seeding.
View Details

Backhoe

Backhoe

The EDGE backhoe attachment gives you the power to handle excavation jobs with your skid steer or track loader. Dig utility trenches and septic tanks quickly without bringing another large piece of equipment to the job site.
View Details

Bale Spear

Bale Spears

Farmers and other agricultural professionals can appreciate the increased productivity of a skid steer with the addition of any EDGE bale spear attachment. Whether you’re moving a round or square bale, you are sure to find the bale mover that is right for you.
View Details

Bale Squeeze

Bale Squeeze

Farmers and other agricultural professionals can appreciate the increased productivity of their compact loader with the addition of any EDGE bale mover implement. Whether you’re moving a round, square, or wrapped bales, you are sure to find the bale mover that’s right for you.
View Details

BoltOn Grapple

Bolt-On Grapple

Handling brush, awkward debris, logs and more is made easy with the right grapple. The EDGE attachment experts can help you select the correct grapple based on your compact loader and your application.
View Details

Boom Lift

Boom Lift

The EDGE boom lift/ tree boom is a simple and economical attachment to make your compact equipment more versatile. The multi-purpose boom lift/ tree boom attachment can be used for loading and unloading attachments or construction materials from hard-to-reach areas.
View Details

Mulcher

Brush Mulcher

The EDGE brush mulcher attachment is designed for efficient mulching of brush in land clearing applications on standard-flow hydraulics. This powerful machine is equipped with a safety pusher bar to push brush or small trees down and allow the mulcher teeth to contact the lower portion of the brush to mulch it up to 1” below ground.
View Details

Brush Root Grapple

Brush Root Grapples

The EDGE brush root grapples are designed for handling awkward materials such as logs, tree stumps, brush and loose hay or straw. The brush root grapples are available in standard and heavy-duty models.
View Details

Bulk Bucket

Bulk Material Bucket

There are more than 60 EDGE compact loader buckets to choose from. Various buckets range from dirt/construction, low profile, bulk material, snow buckets and utility buckets. These buckets are available for compact loaders with universal mounting system.
View Details

Cement Mixer

Cement Mixer

Use your compact loader to complete large concrete projects in small areas with the EDGE® cement mixer. The mixer features a mixing capacity of 5 ft3. (.142m3) and a total drum capacity of 11 ft3. (.311 m3).
 
View Details

Chipper

Chipper

Branches and leaves into perfect size chips for use as ground cover for pathways or in flowerbeds to control weeds, retain moisture, and improve composting processes. Perfect for woodlot owners, arborists and municipalities to dispose of brush and branches.

 

View Details

sslColdPlanerHigh

Cold Planer - High Flow

Few attachments can hold up to the daily abuse or meet the heavy-duty requirements of milling attachments. Designed for precise asphalt and concrete cuts, milling attachments are also valuable for utility crews and cable installation.
View Details

40inColdPlaner

Cold Planer - High Flow HD

Few attachments can hold up to the daily abuse or meet the heavy-duty requirements of milling attachments. Designed for precise asphalt and concrete cuts, milling attachments are also valuable for utility crews and cable installation.
View Details

EDGE Cold Planer Std Flow

Cold Planer - Standard Flow

Few attachments can hold up to the daily abuse or meet the heavy-duty requirements of milling attachments. Designed for precise asphalt and concrete cuts, milling attachments are also valuable for utility crews and cable installation.
View Details

Concrete Placing Bucket

Concrete Placing Bucket

The EDGE concrete placing bucket allows your compact loader to complete big concrete projects in small areas. This attachment is designed to accurately, quickly and neatly carry and place concrete in tight areas or locations that cannot support a cement truck.
View Details

Dirt Bucket Teeth

Construction Buckets

EDGE dirt/construction buckets are offered as standard/extended or heavy duty (both with or without flush mounted teeth) and as standard, high, or low heel. All of these buckets feature .75” (19 mm) cutting edge thickness and 34.6” (879 mm) bucket depth. Excellent cutting edge visibility and high breakout force are the trademarks of these buckets.
View Details

Dozer Blade

Dozer Blades

So simple, yet so vital, the EDGE dozer blade has stood the test of time. You’ll find different blades for a variety of settings, conditions, and uses, including scraping and leveling, and flood cleanup.
View Details

Alley Scraper

Feed Alley Scraper

The EDGE feed alley scraper is an essential tool in agricultural applications. They are great for cleanup work, and can be used for other applications such as flood cleanup as well.
View Details

Grader Blade

Grader Blade

The EDGE grader blade attachment can turn your compact equipment into a high-performance grading machine This attachment is ideal for sub grading and blacktop preparation.
View Details

Grade Blade with Laser System

Grader Blade - Laser

The EDGE grader blade attachment can turn your skid steer or track loader into a high-performance grading machine. It features a 96” (2438 mm) blade, control box for in-cab hydraulic control of angle and tilt, and a reversible/replaceable cutting edge.
View Details

Grader Rake

Grader Rake

From turf and seeding projects to heavy duty landscaping, there is an EDGE rake attachment available to turn your compact loader into a valuable landscaping machine. The EDGE grader rake is ideal attachment to scarify, smooth and level hard-packed soil.
View Details

Grapple Bucket Medium

Grapple Buckets

Move heavy, hard-to-handle materials with an EDGE grapple bucket. The grapple buckets are available in standard, medium and heavy-duty models with widths ranging from 60” (1524 mm) to 88” (2235 mm).
View Details

HD Rotary Brush Cutter

HD Rotary Bruch Cutter

The EDGE heavy-duty rotary brush cutter is powerful enough to handle your most demanding cutting jobs. This aggressive brush cutting machine is engineered to cut brush and trees up to 8” (203 mm) in diameter and clear even the most rugged and overgrown terrain.
View Details

High Dump Bucket

High Dump Bucket

Specialty EDGE buckets attach easily and allow your compact loaders to take advantage of its power and mobility for a very particular job. The EDGE high dump bucket is ideal for loading feed mixers and trucks.
View Details

High Reach Clipper

High Reach Clipper

Easily remove branches along fence rows with the EDGE high-reach clipper; available as standard-duty and heavy-duty. Both models feature a 6-foot reach and a rotating cutting head with powerful jaws to make a smooth cut on hardwoods up to 9” (229) in diameter, even at ground level.
View Details

hitch adapter

Hitch Adapter

The EDGE hitch adapter is a handy, economical attachment that every compact loader operator should have. Move implements, trailers, wagons, boat trailers or other types of equipment easily and efficiently with the EDGE hitch adapter.
View Details

Hopper Broom

Hopper Broom

The EDGE hopper broom is a bi-directional collection broom which allows the operator to sweep in forward and reverse, and gives excellent performance in milling, material pickup, road maintenance and job-site cleanup.
View Details

Agitator

Hydraulic Spreader

The EDGE hydraulic spreader is ideal for quickly spreading sand, salt, seed, fertilizer or any other free-flowing granular material on sidewalks, driveways, gross or soil.
View Details

InCab Backhoe

In-Cab Backhoe

The EDGE in-cab backhoe attachment allows the operator to remain in the comfort and protection of the cab while operating the backhoe and the skid loader and track loader controls. Increase production and operator cycle times by controlling the stabilizers, boom, dipper, bucket and also move the machine without ever leaving the cab.
View Details

Grapple Bucket Industrial Tine

Industrial Tine Grapple

Handling brush, awkward debris, logs and more is made easy with the right grapple. The EDGE industrial tine grapple is designed for moving heavier, hard-to-handle materials such as logs, brush and scrap materials.
View Details

Land Leveler

Land Leveler

The EDGE land leveler is the perfect landscaping preparation attachment designed to sift dirt and remove large chunks and rocks for a smooth finish. The land leveler can be used to smooth out lots, roads and trails or prepare running tracks and baseball diamonds.
View Details

Breaker

Loader Breakers

Pulverize concrete and rock quickly and easily with the EDGE hydraulic breaker. The EDGE hydraulic breaker is the ideal attachment for demolition and construction projects.
View Details

LOG GRAPPLE

Log Grapple

Handling brush, awkward debris, logs and more is made easy with the right grapple. The EDGE log grapple is designed for handling and transporting logs, pipes, brush and other bulky materials.
View Details

Log Grapple Rotating

Log Puller

It’s not just for logs! The EDGE log puller/rotating grapple is a versatile attachment designed to lift and handle heavy, awkward size material such as logs, culverts, water pipes, telephone poles and more with controlled precision.
View Details

Log Splitter Inverted

Log Splitter - Inverted

Double your productivity with the EDGE inverted log splitter providing a fast, easy and cost-effective alternative to the back-breaking job of splitting wood. Split wood up to 24” with less time and effort.
View Details

Manure Scraper

Manure Scraper

The EDGE manure scraper is an essential tool in agricultural applications. They are great for cleanup work, and can be used for other applications such as flood cleanup as well.
View Details

Manure Slurry Bucket

Manure Slurry Bucket

The EDGE® Manure Slurry Bucket is ideal for cleaning free stall barns or removing any liquid waste products such as storm water run-off.
View Details

Material Unroller

Material Unroller

The EDGE material unroller is a must have attachment for any landscaping company. Contractors will find themselves up to three times more productive with half of the labor!
View Details

Mini Backhoe

Mini Backhoe

Take full advantage of your skid loader or track loader’s mobility with EDGE mini-backhoes. Perfect for digging trenches and footings, the EDGE mini-backhoe is available as a “fi xed” unit or as a unit “with swing”.
View Details

Onboard Scale

On-Board Scale

The EDGE on-board scale measures, displays and records the dynamic or static weight of a load on or in a bucket, combination bucket, grapple or pallet fork.
View Details

Pallet Fork Grapple

Pallet Fork w/Grapple

The EDGE pallet fork frame with grapple features a unique jaw action which pulls material toward the frame as the jaw closes.
View Details

Pallet Forks

Pallet Forks

Standard, medium and heavy-duty models are available to suit any need and any budget. EDGE pallet forks can also be custom branded for free with company names or logos.
View Details

Pallet Fork Hydraulic

Pallet Forks - Hydraulic

The EDGE pallet forks with hydraulics come in three different styles: rotating, side shift, and sliding tine. All three options feature the walk-through style, allowing easy access in and out of the cab.
View Details

Post Driver

Post Driver

Compact loader maneuverability allows the unit to be easily moved around buildings, storage sheds, trees and other obstacles, with minimal hydraulic power.
View Details

Post Pounder

Post Pounder

This cost-effective tool can also be used to remove wooden or metal fence posts quickly and easily. It is ideal for use in agricultural applications or for property line fences with solid steel or wood posts.
View Details

Power Rake

Power Rake

From turf and seeding projects to heavy duty landscaping, there is an EDGE rake attachment available to turn your compact loader into a valuable landscaping machine.
View Details

Preparator

Preparator Rake

The EDGE preparator rake is the perfect attachment to till compacted soil into a perfect seedbed.
View Details

Rock Wheel

Rock Wheel

The EDGE rock wheel is an efficient and precise attachment that makes road or utility cuts in up to 15 feet per minute.
View Details

Rotary Brush Mower

RotartyBrush Mower

From heavy weeds, undergrowth, brush and small saplings up to 4” (102 mm) in diameter, the EDGE rotary brush mowers are ideal for clearing trails for horses, snowmobiles, skiing or biking in areas that would normally be inaccessible.
View Details

Roto Tiller

Roto Tiller

Perfect for seedbed preparation or other landscape functions, the EDGE roto tiller is designed for breaking up clumps and mixing compost or other materials into existing soil.
View Details

sand side shooter bucket

Sand Side Discharge Bucket

The EDGE sand side discharge buckets are a “must have” for many farming applications.
View Details

Sawdust Bucket

Sawdust Discharge Bucket

The EDGE sawdust side discharge buckets are a “must have” for many farming applications. The sawdust bucket has a beater to help prevent the bridging of materials.
View Details

Scarifier Rake

Scarifier Rake

The EDGE scarifier rake has the ability to go from an unfinished to a finished seed bed with one easy-to-use attachment.
View Details

Stump Grinder-Self FeedinG

Self-Feeding Stump Grinder

The EDGE self-feeding stump grinder is the perfect attachment for arborists, landscapers, large contractors or maintenance crews.
View Details

Silage Defacer

Silage Defacer

The EDGE silage defacer is perfect for farmers with open-pit silage bunkers. It reduces spoilage by exposing less surface area to air and moisture.
View Details

Silt Fence Installer

Silt Fence Installer

The EDGE silt fence installer is a unique attachment that allows silt fencing to be installed effectively and effortlessly by a single operator.
View Details

Skeleton Bucket

Skeleton Rock Bucket

EDGE skeleton rock buckets are ideal for picking up stones and large awkward debris. The grated bottom allows dirt to fall through. The EDGE skeleton rock bucket is a “must have” for skid steer operators in the agricultural, commercial and landscaping industries.
View Details

Skeleton Rock Grapple

Skeleton Rock Grapple

Handling brush, awkward debris, logs and more is made easy with the right grapple. The EDGE skeleton rock grapple is designed to scrape with loader arms against boom stops. It’s see-through design allows for excellent visibility, and the design offers complete protection of the hose routing.
View Details

Skeleton Tine Grapple

Skeleton Tine Grapple

Handling brush, awkward debris, logs and more is made easy with the right grapple. The EDGE skeleton tine grapple is designed to handle brush, logs, pipe and awkward debris.
View Details

Slab Bucket

Slab Lifter Bucket

One of EDGE’s more unique products, the slab lifter bucket works very well for removing concrete on sidewalks, driveways and any construction site.
View Details

Snowblower

Snow Blower

With the EDGE snow blower attachment, you can remove snow from sidewalks, driveways or any area your skid loader will fi t.
View Details

snowpush_2

Snow Push - Oscillating

The oscillating snow push is also great for moving other materials such as flood, waste water and manure cleanup.
View Details

Snow Push STD

Snow Push - Standard

The EDGE snow push is the perfect year-round attachment that can be used to move more than just snow.
View Details

Sod Unroller

Sod Unroller

The simple design of the EDGE sod unroller requires no hydraulics, and provides an easy and economical method to quickly laying large rolls of sod.
View Details

Stump Grinder

Stump Grinder

The EDGE stump grinder is the perfect attachment for arborists, landscapers, large contractors or maintenance crews.
View Details

Stump Removal Bucket

Stump Removal Bucket

The EDGE stump removal bucket is the ideal attachment for every landscape professional or everyday compact loader operator in need of a multi-functional tool.
View Details

Tilt Attach

Tilt Attach

Fully utilize your compact loader on hilly terrain or any area you need to tilt an attachment with the EDGE tilt attach.
View Details

Tree Handler

Tree Handler

Landscape professionals and nurserymen can transform their compact equipment into useful and profitable tools for tree and shrubbery planting, transplanting and removal with the EDGE tree handler.
View Details

Tree Puller

Tree Puller

The EDGE tree puller/grabbing tool is designed for tough landscaping, construction and agricultural applications. Use it’s powerful jaws to easily pull posts, rebar, trees and roots or shrubs out of the ground.
View Details

new tree shear

Tree Shears

Ideal for clearing fence lines and other hard-to-reach areas, the EDGE tree shear is necessary to forestry, landscaping and agricultural applications.
View Details

Tree Spade

Tree Spades

Move and place trees, shrubbery, and bolders and dig holes for new trees all with the same attachment. Landscape professionals and nurserymen can transform their compact equipment into useful and profitable tools.
View Details

Tree Transplanter Std

Tree Transplanter

Landscape professionals and nurserymen can transform their compact equipment into useful and profitable tools for tree and shrubbery planting, transplanting and removal with the EDGE tree transplanter.
View Details

Trench Filler

Trench Filler

Covering 60’ (18.3 m) of open trench in 60 seconds is now possible with the EDGE trench filler. It eliminates tearing of the turn because the compact loader can straddle the trench and cover it in one pass.
View Details

Trencher

Trencher

Increase the productivity of your compact loader with an EDGE trencher. Trenchers are one of the most common attachments for compact loaders. Various chain types are available to suit the soil type and size of the project.
View Details

Angle Snow Blade

Trip Edge Snow Blade

So simple, yet so vital, the EDGE trip edge snow blade has stood the test of time. EDGE trip edge snow blades are available as standard duty and heavy duty.
View Details

U-Blade

U-Blades

The EDGE U-Blade is an essential landscape tool that will transform your compact equipment into a profitable workhorse for digging, transplanting and removing trees and shrubs.
View Details

utility fork grapple

Utility Fork Bucket/Grapple

Designed to handle bulk materials, EDGE utility fork buckets are extremely efficient handling bulk materials such as loose hay, straw, manure, branches, sod and silage.
View Details

V-Snow Blade

V-Blade

So simple, yet so vital, the EDGE V-blade has stood the test of time. The V-blade increases your compact loader's productivity and efficiency by plowing snow.
View Details

Vibratory Roller

Vibratory Roller

It’s easy to turn your compact loader into a high performance compactor with the EDGE vibratory roller. The vibratory rollers are available in smooth or padded drum versions for compacting various materials.
View Details
Check out our full line of attachment at Edge Attach!

Options

Performance

Standard Optional
All-Tach® Mounting System
IdealTraxIndustry Exclusive
Straight TrackingIndustry Exclusive
Power-A-Tach Mounting System
  Standard Optional
Self-Leveling Hydraulic Lift Action
Selectable Self-Leveling Lift Action
Two-Speed Hydraulic Drive System
Horsepower Management System

Engine

Standard Optional
Engine Alert System w/ Error Display
Engine Automatice Shutdown System
Glowplug Start Assist
Dual-Element Air Cleaner w/ Indicator

Operator Station

Standard Optional
Pressurized Cab Enclosure with A/C
Fold-Up Door
Multi-Function Function Display Screen
  Standard Optional
Electronic Attachment Control - 14 Pin Connector
Hydraulic Pilot Controls
  Standard Optional
Variable Speed Control, Selectable On & Off
Foot Throttle
Full-Suspension Seat
Air Suspension Seat

Undercarriage

Standard Optional
Elevated Planetary Final Drives
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Read Idlers
Rubber Track Undercarriage System
Servo-Controlled Hydrostatic Drive
Dedicated Undercarriage

Structure

Standard Optional
Tilt-out Foot PodIndustry Exclusive
Back-up Alarm
Combination Radiator & Hydraulic Oil Cooler
ROPS/FOPS Level II Overhead Guard
Anti-Vandalism Lock Provisions
Mechanical Lift Cylinder Lock

Hydraulic System

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Specifications
Overall Operating Height - Fully Raised (mm) 168" (4267)
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 34.5" (876)
Dump Angle - Fully Raised 41°
Dump Height - Fully Raised (mm) 98" (2489)
Maximum Rollback Angle - Fully Raised 102.5°
Overall Height at ROPS (mm) 83.1" (2111)
Overall Length with Bucket - Standard Counterweight (mm) 157.8" (4008)
Overall Length without Bucket - Standard Counterweight (mm) 126.8" (3221)
Specified Height (mm) 67.7" (1720)
Reach at Specified Height (mm) 31.3" (795)
Dump Angle at Specified Height 66.8°
Maximum Rollback Angle at Ground 30°
Carry Position (mm) 8.2" (208)
Maximum Rollback Angle at Carry Position 31.6°
Digging Position - Below Ground (mm) +0.5" (13)
Angle of Departure with Standard Counterweight 25°
Ground Clearance (mm) 12.3" (313)
Track Gauge (mm) 51.7" (1313)
Track Shoe Width (mm) 17.7" (450)
Crawler Base (mm) 61.5" (1562)
Overall Width - Less Bucket (mm) 69.5" (1765)
Bucket Width (mm) 83.9" (2131)
Clearance Radius - Front with Bucket (mm) 98.4" (2499)
Clearance Radius - Rear with Standard Counterweight (mm) 70.7" (1796)
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 2,550 lbs. (1157)
Operating Capacity at 50% of Tipping Load (kg) 3,643 lbs. (1652)
Tipping Load (kg) 7,286 lbs. (3305)
Operating Weight (kg) 11,600 lbs. (5260)
Engine
Make/Model Deutz/ TD 3.6 L4 Tier IV
Type 4-Stroke Turbo
Displacement (L) 221 cu.in. (3.621)
Cylinders 4
Net Horsepower (kW) @ 2500 rpm 70.7 hp (52.7) @ 2300
Peak Torque (Nm) @ 1600 rpm 243 ft.-lbs. (330) @ 1600
Oil Pump Capacity (L) 11 qts. (10.4)
Alternator Voltage/Amperage 12V/120A
Track Drives
Drawbar Pull / Tractive Effort (kN) 12,453 lbs. (5649)
Track Type Rubber
Track Rollers 5
Roller Type Steel
Track Width (mm) 17.7″ (450)
Ground Pressure (bar) 5.2 psi (0.36)
Forces
Bucket Breakout - Tilt Cylinder (kg) 8,384 lbs. (3803)
Bucket Breakout - Lift Cylinder (kg) 7,437 lbs. (3373)
Ground Speed - Single Speed (km/hr) 5.3 mph (8.5)
Ground Speed - Two Speed (km/hr) 7.5 mph (12.1)
Volume
Fuel Tank (L) 32 gal. (121.1)
Hydraulic Reservoir Tank (L) 13.8 gal. (52.2)
Coolant Capacity (L) 6.1 gal. (23.1)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 29.07 gpm (110)
High-Flow Hydraulic Flow - Rated Speed (L/min) 37.7 gpm (142.7)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Reduction
CTL_SpecDiagram