Performance

The Mustang 2500RT Track Loader was designed from the ground up to be the top performing machine on the jobsite.

2500RT_FastDump

Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Operating Capacity at 35% Tipping Load with Optional Counterweight (kg) 2,773 lbs. (1258)
Ground Speed - Standard 2-Speed (km/hr) 7.9 mph (12.7)

  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator's Cab

The extra-large, state-of-the art operator’s station on the new 2500RT Compact Track Loader is designed for optimal operator comfort resulting in all-day productivity on the jobsite.

2500RT_FrontRightThreeQuarter

  • Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls

Controls on the 2500RT Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

Cab

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
  • Joystick Sensitivity
  • Position Reaction
  • Engine Response
  • AntiStall
  • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Engine

The Mustang 2500RT Track Loader engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

2500RT_Engine

Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement/Cylinders (L) 221 cu.in. (3.3)/4
Gross Power (kW) @ rpm 74.3 hp (55.4) @ 2300
Peak Torque (Nm) @ rpm 243 ft.-lbs. (330) @ 1500
Oil Pump Capacity (L) 9 qts. (8.5)
Alternator Voltage/Amperage 14V/95A

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.

Hydraulics

The Mustang 2500RT Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

2500RT_DumpGravel

Auxiliary Hydraulic Flow - Rated Speed (L/min) 24.9 gpm (91)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Powerful drive motors deliver superior pushing power to the tracks.
  • Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
  • Power track drive motors deliver superior pushing power.
  • Optional Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.

Lift Arm

The robust lift-arm on the 2500RT Track Loader is designed for optimal strength, visibility and capacity.

2500RT_DumpSand

Height to Hinge Pin - Fully Raised (mm) 128" (3251)

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

Serviceability

Serviceability is very important to our customers. The 2500RT is sure to exceed your service expectations.

2500RT_Service

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.

Attachments

Angle Broom

Angle Broom

The EDGE angle broom cleans up just about anything, anywhere. This compact loader attachment can be used year-round and is an excellent tool to assist in the removal of snow or debris on sidewalks, parking lots and more.

Loader Bucket_small

Buckets - Track Loader

Use one bucket for a wide variety of applications, such as grading, scraping, grappling, dozing dirt, brush removal, material spreading and more. The high strength steel clam shell bottom is shaped to prevent bowing of heavy material and two large, guarded cylinders provide powerful clamping.

Fork

Carriages & Pallet Forks

Moving pallets with your machine is a task that makes sense for millions of machine owners, but as with any other machines attachment your machine is only as good as your attachment. We have a full line of machine pallet forks for sale designed to fit any size.

40inColdPlaner

Cold Planer - High Flow HD

Few attachments can hold up to the daily abuse or meet the heavy-duty requirements of milling attachments. Designed for precise asphalt and concrete cuts, milling attachments are also valuable for utility crews and cable installation.

EDGE Cold Planer Std Flow

Cold Planer - Standard Flow

Few attachments can hold up to the daily abuse or meet the heavy-duty requirements of milling attachments. Designed for precise asphalt and concrete cuts, milling attachments are also valuable for utility crews and cable installation.

Bolt On Cutting Edge

Cutting Edges - Track Loader

Use one bucket for a wide variety of applications, such as grading, scraping, grappling, dozing dirt, brush removal, material spreading and more. The high strength steel clam shell bottom is shaped to prevent bowing of heavy material and two large, guarded cylinders provide powerful clamping.

Above is only a small sample of the attachments we have. Check out our full line of attachment at Edge Attach!

Options

Performance

Standard Optional
All-Tach® Mounting System
IdealTraxIndustry Exclusive
Straight TrackingIndustry Exclusive
Power-A-Tach Mounting System
  Standard Optional
Self-Leveling Hydraulic Lift Action
Selectable Self-Leveling Lift Action
Two-Speed Hydraulic Drive System
Hoursepower Management System

Engine

Standard Optional
Engine Alert System w/ Error Display
Engine Automatice Shutdown System
Glowplug Start Assist
Dual-Element Air Cleaner w/ Indicator

Operator Station

Standard Optional
Pressurized Cab Enclosure with A/C
Multi-Function Function Display Screen
Drive Sensitivity Adjustment
  Standard Optional
Electronic Attachment Control - 14 Pin Connector
Electro-Hydraulic Joystick Controls
Selectable Control Pattern Configuration
  Standard Optional
Variable Speed Control, Selectable On & Off
Foot Throttle
Full-Suspension Seat

Undercarriage

Standard Optional
Elevated Planetary Final Drives
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Read Idlers
Rubber Track Undercarriage System
Servo-Controlled Hydrostatic Drive
Dedicated Undercarriage

Structure

Standard Optional
Tilt-out Foot PodIndustry Exclusive
Back-up Alarm
Combination Radiator & Hydraulic Oil Cooler
ROPS/FOPS Level II Overhead Guard
Anti-Vandalism Lock Provisions
Mechanical Lift Cylinder Lock

Hydraulic System

Standard Optional
Auxiliary Hydraulics
High-Flow Auxiliary Hydraulics

Specifications

Specifications
Overall Operating Height - Fully Raised (mm) 175.2" (4450)
Height to Hinge Pin - Fully Raised (mm) 128" (3251)
Reach - Fully Raised (mm) 39.2" (996)
Dump Angle - Fully Raised 41°
Dump Height - Fully Raised (mm) 91.7" (2329)
Maximum Rollback Angle - Fully Raised 102.5°
Overall Height at ROPS (mm) 83.1" (2111)
Overall Length with Bucket - Standard Counterweight (mm) 166" (4216)
Overall Length without Bucket - Standard Counterweight (mm) 125" (3175)
Specified Height (mm) 67.7" (1720)
Reach at Specified Height (mm) 32" (813)
Dump Angle at Specified Height 75°
Maximum Rollback Angle at Ground 30°
Carry Position (mm) 7" (179)
Maximum Rollback Angle at Carry Position 25°
Digging Position - Below Ground (mm) -0.2" (5.1)
Angle of Departure with Standard Counterweight 25°
Ground Clearance (mm) 13" (330)
Track Gauge (mm) 51.7" (1313)
Track Shoe Width (mm) 17.7" (450)
Crawler Base (mm) 61.5" (1562)
Overall Width - Less Bucket (mm) 69.5" (1765)
Bucket Width (mm) 83.9" (2131)
Clearance Radius - Front with Bucket (mm) 104.7" (2659)
Clearance Radius - Rear with Standard Counterweight (mm) 70.7" (1796)
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 2500 lbs. (1134)
Operating Capacity at 50% of Tipping Load (kg) 3571 lbs. (1620)
Tipping Load (kg) 7143 lbs. (3240)
Operating Weight (kg) 11,595 lbs. (5259)
Engine
Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement (L) 221 cu.in. (3.6)
Cylinders 4
Gross Horsepower (kW) @ 2300 rpm 74.3 hp (55.4)
Peak Torque (Nm) @ 1500 rpm 243 ft-lbs. (330)
Oil Pump Capacity (L) 9 qts. (8.5)
Alternator Voltage/Amperage 14V/95A
Track Drives
Drawbar Pull / Tractive Effort (kN) 14,317 lbs. (6494)
Track Type Rubber
Track Rollers 5
Roller Type Steel
Track Width (mm) 17.7" (450)
Ground Pressure (bar) 5.3 psi (0.37)
Forces
Bucket Breakout - Tilt Cylinder (kg) 6894 lbs. (3127)
Bucket Breakout - Lift Cylinder (kg) 6786 lbs. (3078)
Ground Speed - Single Speed (km/hr) 5.4 mph (8.7)
Ground Speed - Two Speed (km/hr) 7.9 mph (12.7)
Volume
Fuel Tank (L) 24 gal. (91)
Hydraulic Reservoir Tank (L) 13.8 gal. (52.2)
Coolant Capacity (L) 5.1 gal. (19.3)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 24.9 gpm (94.3)
High-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Reduction
CTL_SpecDiagram